- Electronic push-button. Activated with a simple touch.
- Side jet with water-air massage. Stimulation of the capillary, lymphatic and cardiovascular circulation.
- Bottom jet. A relaxing massage on your legs to alleviate the stress of the day.
- Intensity control of the jets softening or reinforcing their power.
- Blanco
Sensitive Touch System
Emma
Sensitive Touch. Hydromassage Water+Air 170x75. Without skirting panel
REF: 64338
Ref 64338
- COLOURS/FINISHES
-
01 White
- ARTICLES
-
Ref Product/Set Measurements €/u 64338 Hydromassage bath water-air and electronic push-button. 170 x 75 cm Options 67447 "L" skirting panel for Emma bath 170 x 75 cm. left-hand. 170 x 75 cm 67448 "L" skirting panel for Emma bath 170 x 75 cm. right-hand 170 x 75 cm Accessories 41480 Headrest for Emma corner or asymmetrical bath - PRODUCT INFORMATION
-
Features
Emma hydromassage water-air electronic push-button, intensity control for water massage, water level indicator, automatic waste, 4 side jets, 2 feet jets and 8 bottom jets (air). / 60 kg. / 1 unit pallet.
Useful information
Gala baths may be purchased with or without skirting panel. The location of the hydromassage system facilitates the installation of the enclosure. The chassis is free-standing, enabling its installation with the least possible disruption. The disinfectant for hydromassage baths with automatic disinfection is available at Gala.
Guarantee
Gala products are guaranteed against any manufacturing defects, from the date of purchase of the product, only if the installation has been carried out in accordance with Gala´s installation instructions and, applying the current legislation on electrical and sanitary appliances, by authorised staff. The guarantee period for acrylic products is of 2 years.
Certificates
High quality is a constant at Gala in order to guarantee the technical and aesthetic features as well as the performance of our products. Please check our product quality certificates.
Maintenance
Cleaning of the bath should be carried out using a soft sponge, soap and water. After cleaning, the bath should be dried so as to prevent limescale forming. No abrasive products, solvents or objects that could damage the bath surface should be used. Should the bath surface be scratched accidentally, it should be enough just to go over the surface with a solvent-free polish. If necessary, the scratch can first be wet-sanded with 800 G wet-and-dry sandpaper, then wet-sanded with 1200 G paper, before finally applying the polish.
- SETTING
- TECHNICAL DRAWINGS
- Downloads