- Electronic push-button. Activated with a simple touch.
- Side jet with water-air massage. Stimulation of the capillary, lymphatic and cardiovascular circulation.
- Feet jet. A comforting massage in the feet area after a day at work.
- Rotating jet. Intense circular massage with relaxing effects.
- Headrest to enjoy a relaxing and comfortable moment in the bath.
- Blanco
Emotive Touch Dorsal System
Mitta
Emotive Touch Dorsal. Hydromassage Water 170x70
REF: 62613
Ref 62613
- COLOURS/FINISHES
-
01 White
- ARTICLES
-
Ref Product/Set Measurements €/u 62613 Hydromassage bath water, electronic push button, intensity control, water level indicator,
back jets and headrestpush-button and regulator.170 x 70 cm Options 67428 Front skirting panel 170 x 50 cm. 170 cm 67432 Side skirting panel 70 x 50 cm. 70 cm - PRODUCT INFORMATION
-
Features
Mitta hydromassage water, electronic push button, intensity control, water level indicator, automatic waste, 4 side jets, 2 feet jets, 4 back jets and headrest. / 54 kg. / 1 unit pallet.
Useful information
Gala baths may be purchased with or without skirting panel. The location of the hydromassage system facilitates the installation of the enclosure. The chassis is free-standing, enabling its installation with the least possible disruption. The disinfectant for hydromassage baths with automatic disinfection is available at Gala.
Guarantee
Gala products are guaranteed against any manufacturing defects, from the date of purchase of the product, only if the installation has been carried out in accordance with Gala´s installation instructions and, applying the current legislation on electrical and sanitary appliances, by authorised staff. The guarantee period for acrylic products is of 2 years.
Certificates
High quality is a constant at Gala in order to guarantee the technical and aesthetic features as well as the performance of our products. Please check our product quality certificates.
Maintenance
Cleaning of the bath should be carried out using a soft sponge, soap and water. After cleaning, the bath should be dried so as to prevent limescale forming. No abrasive products, solvents or objects that could damage the bath surface should be used. Should the bath surface be scratched accidentally, it should be enough just to go over the surface with a solvent-free polish. If necessary, the scratch can first be wet-sanded with 800 G wet-and-dry sandpaper, then wet-sanded with 1200 G paper, before finally applying the polish.
- SETTING
- TECHNICAL DRAWINGS
- Downloads