Mitta

Ref 62701

COLOURS/FINISHES

01 White

ARTICLES

Ref	Product/Set	Measurements	€/u
62701	Bath without chassis and without waste. For the bath to be free-standing a chassis is necessary.	160 x 70 cm
	Options
41560	Chassis with adjustable feet for free-standing bath Mitta and Nila 70 cm.
67429	Front skirting panel 160 x 50 cm.	160 cm
67432	Side skirting panel 70 x 50 cm.	70 cm
	Accessories
41190	Headrest. Polyurethane light grey.

PRODUCT INFORMATION

Features Mitta without chassis and without waste. / 17 kg. / 10 units pallet. For the bath to be free-standing a chassis is necessary. Capacity 172 l. Useful information Gala baths may be purchased with or without skirting panel. The location of the hydromassage system facilitates the installation of the enclosure. The chassis is free-standing, enabling its installation with the least possible disruption. The disinfectant for hydromassage baths with automatic disinfection is available at Gala. Guarantee Gala products are guaranteed against any manufacturing defects, from the date of purchase of the product, only if the installation has been carried out in accordance with Gala´s installation instructions and, applying the current legislation on electrical and sanitary appliances, by authorised staff. The guarantee period for acrylic products is of 2 years. Please check our product installation manuals.

Certificates High quality is a constant at Gala in order to guarantee the technical and aesthetic features as well as the performance of our products. Please check our product quality certificates. Maintenance Cleaning of the bath should be carried out using a soft sponge, soap and water. After cleaning, the bath should be dried so as to prevent limescale forming. No abrasive products, solvents or objects that could damage the bath surface should be used. Should the bath surface be scratched accidentally, it should be enough just to go over the surface with a solvent-free polish. If necessary, the scratch can first be wet-sanded with 800 G wet-and-dry sandpaper, then wet-sanded with 1200 G paper, before finally applying the polish.

SETTING

TECHNICAL DRAWINGS

Downloads

±2 MB

Download website product sheet (.PDF)

2D
	165.11 KB		Rectangular non-hydro 160x70 - Técnico (.AI)
	358.71 KB		Rectangular non-hydro 160x70 - Técnico (.DWG)
	2.46 MB		Rectangular non-hydro 160x70 - Técnico (.DXF)
	176.87 KB		Rectangular non-hydro 160x70 - Técnico (.PDF)
3D
	293.08 KB		Rectangular non-hydro 160x70 - 3D (.DWG)
	ArchiCAD
	Revit